GeoPress Quick-Start Guide

For more information on GeoPress operation and diagnostics, reference the GeoPress Operation article.

1. Release the E-stop button, a red light next to the main power connection will turn on.
2. The LED light on the sides of the GeoPress will begin blinking yellow once modules are online. This should take about 1 minute.
3. On the app, go to the Maps page and press on the GeoPress icon in the upper right corner.

4. Press Connect to open a list of available GeoPress units. Select your GeoPress from the list.

5. Once connected, press Reset GeoPress on the popup that appears. If you do not see a pop up, and the LED lights on the side of the GeoPress are still flashing, press Reset on the GeoPress page. Once the side lights are solid green, the GeoPress is ready to use.
   1. If a GeoTube is already in the Fill position (underneath the plunger), the carousel will move to check the GeoTube tag, then return to the Fill position
   2. If a GeoTube has not been loaded yet, a new GeoTube will be dropped in the carousel 
      and moved to the Fill position

6. GeoPress is now connected and ready for soil. For further instructions on starting a field and operating the GeoPress, reference GeoPress Operation

GeoPress Component Overview