Press the fields list menu at the top of the Map page, choose New fields, and then select Drive in the New Field window
Enter the name of the new field under Field Name. The new field can either be placed under an existing Client and Farm by selecting from the list, or a new Client and Farm name can be entered.
Click Drive once Client, Farm, and Field names have been selected to move on to the next step
There are three actions at the bottom of the boundary driving page:
Record/Pause: Used to start and stop boundary recording.
Commit: Saves and finishes field boundary. When Commit is pressed, a line will be snapped from your current location to the starting location.
Cancel: Boundary driving window will be closed the changes will not be saved.
Press Record and start driving around the field boundary. A yellow line will follow you vehicle path.
If Pause is pressed, the boundary recorder will stop recording. If the vehicle location has moved after pressing Record again, a line will be snapped between the two points. This feature can be used to drive around obstacles on the field edge, or to snap a line across a straight edge of the field.
To finish and save the boundary, press Commit. This will also snap a line from where you started driving the boundary, to where you finished.
Once the boundary is created, you can continue with field editing through the menu options on the right. If you would like to add an additional boundary to the field, you can press the "+" icon under the Boundary section, and draw or drive an additional boundary.
If Drive New Boundary is selected, repeat steps 5-7 for the new boundary. If Draw New Boundary is selected, reference Drawing a New Field for details on how to draw a boundary.
Once all boundaries are recorded and the field is complete, press Stop Editing in the menu on the right to save the field changes